Fantom
Apparatus Of Satan
- Reaction score
- 225
- Location
- Your House
Folks, the PVC that drains water from our furnace did not reach the drain in our floor, so every once in a while, it would spew water all over the basement floor which is NO BUENO.
I just cut back the PVC and put a 90 degree elbow on it, then ran a 13 inch section to the drain. took about 10ish minutes and only ONE trip to home depot.
BEFORE:
AFTER:
Pro Tip: After cutting PVC, make sure that your cut end is square and that you sand it to remove the burs. These burs can prevent you from getting a tight fit.
BEFORE:
AFTER:
I just cut back the PVC and put a 90 degree elbow on it, then ran a 13 inch section to the drain. took about 10ish minutes and only ONE trip to home depot.
BEFORE:

AFTER:

Pro Tip: After cutting PVC, make sure that your cut end is square and that you sand it to remove the burs. These burs can prevent you from getting a tight fit.
BEFORE:

AFTER:
